Detailed Product Description

GSM auto-dial alarm system

 Detailed Description

1.Is a one-zone alarm system, very suitable for small offices and home appliances .

2.Alarm system uses a GSM communicator, so is no distance limits to receive alarms or dial out to control the alarm system .

3.The system can support GSM/CDMA cell phones .

4.Can pre-store and dial five phone numbers. If an alarm occurs,the numbers will be dialed in stored sequence .

5.Using remote controllers you can arm, disarm and panic from long distance .

6.You can control the system by using a telephone anytime, wherever you are. For security reasons a PIN code must be used for access .

7.Supports all kinds of wireless sensors, such as PIR detectors, gas sensors, smoke sensors and infrared balusters . 

8.Supports any wired sensors available (NC contacts) .

9.Fixed telephone line is not needed , Suitable for cottage, house, shop, garage and everywhere GSM network is present .

10.For weak GSM signal area an external antenna can be used .

11.Three open collector outputs available to be used according to customer demands .

12.One on-board relay available for home application .

Technical Parameters :

   Power supply : Input AC220V; 230-240V; 110V; Output DC 9V, 300mA b

   Wireless frequency :850/900/1800/1900 MHz ; 315MHz/433MHz

Standard pack components :1 main panel ,1 wireless infrared (motion) detector ,1 wireless door magnetic detector , 1 siren 2 remote controllers, 1 power supply 1 manual

Weight : 12 kg / set

Size : 170*112*28 mm

Certificates: CE, FCC, RoHS , ISO9001:2000