GSM Transformer Alarm System

Brief Introduction:

• Using the BenQ M23 GSM module of high-performance, and supporting the tri-band GSM network.
• Support the three phase electrical power alarming.
• Have the unique function of taking photos and send the pictures(MMS), and will taking photos of the spot automatically and also send pictures(MMS) to the mobile phone.
• Have the function of anti-demolition alarming.
• When alarming, the alarm system will ring the alarm siren, and send messages and dial out the number to alarming for five mobile phones at the same time.
• Have three defense, which can connect the wire detectors.
  Different messages to different alarming situation, and the message can edit by that.
• Can arm/ disarm through send message and remote control the telephone, and can set up a number of parameters.
• Can alarm linked with the YL-007 monitoring center.
  Have one linkage output ports, and can link with lights and other equipments when alarming.
• Have a built-in 7 AH battery backup, which can standby up to ten days without power supply and  charge automatically.

Technical Parameters

• Operating Voltage: DC 12V
• Static Current: ≤150Ma
• Alarm Current: ≤600mA
• Support GSM900/1800/1900 MHz, three working modes switched automatically
• Support PHASE 2/2+ agreement (including data business)
• Sending power:2W/EGSM900,1W/GSM1800 GSM1800
• Gable input port:  three
• Support power supply: AC380V (PHASE 3/4), AC 220V (PHASE 2/2+)
• Wireless Receiving Frequency: 315MHz±0.5MHz
• Wireless Receiving Sensitivity: 315MHz±0.5MHz
• Anti-interference: 1V/mfrequency:20-1000 MHz
• Outer Alarm siren volume: 110dB
• Working temperature: -40deg C ~ +55deg C
• Humidity: ≤90%